Skip to main content

Firemaking – How to Make a Fire

Who doesn’t love sitting around a fire on a cool fall night, or a crackling fireplace? But what if you needed to start a fire for survival? Do you have the firemaking skills required for your survival?

First thing is to know the basics of fire safety and fire starting:

  • Always light your fire from the upwind side.
  • Make sure to lay your tinder, kindling, and fuel so that your fire will burn as long as you need it.
  • Igniters provide the initial heat required to start the tinder burning.

 

Firemaking skills fall into two categories: modern methods and primitive methods.

Modern Methods for Firemaking

Modem igniters use modem devices–items we normally think of to start a fire.

  • Matches: Make sure these matches are waterproof. Also, store them in a waterproof container along with a dependable striker pad.
  • Convex Lens: Use this method only on bright, sunny days. The lens can come from binoculars, camera, telescopic sights, or magnifying glasses. Angle the lens to concentrate the sun’s rays on the tinder. Hold the lens over the same spot until the tinder begins to smolder. Gently blow or fan the tinder into flame, and apply it to the fire lay.
  • Metal Match: Place a flat, dry leaf under your tinder with a portion exposed. Place the tip of the metal match on the dry leaf, holding the metal match in one hand and a knife in the other. Scrape your knife against the metal match to produce sparks. The sparks will hit the tinder. When the tinder starts to smolder, proceed as above.
  • Battery: Use a battery to generate a spark. Use of this method depends on the type of battery available. Attach a wire to each terminal. Touch the ends of the bare wires together next to the tinder so the sparks will ignite it.
  • Gunpowder: Often, you will have ammunition with your equipment. If so, carefully extract the bullet from the shell casing, and use the gunpowder as tinder. A spark will ignite the powder. Be extremely careful when extracting the bullet from the case.

 

Primitive Methods for Firemaking

Primitive igniters are those attributed to our early ancestors.

  • Flint and Steel: The direct spark method is the easiest of the primitive methods to use. The flint and steel method is the most reliable of the direct spark methods. Strike a flint or other hard, sharp-edged rock edge with a piece of carbon steel (stainless steel will not produce a good spark). This method requires a loose-jointed wrist and practice. When a spark has caught in the tinder, blow on it. The spark will spread and burst into flames.
  • Fire-Plow: The fire-plow is a friction method of ignition. You rub a hardwood shaft against a softer wood base. To use this method, cut a straight groove in the base and plow the blunt tip of the shaft up and down the groove. The plowing action of the shaft pushes out small particles of wood fibers. Then, as you apply more pressure on each stroke, the friction ignites the wood particles.
  • Bow and Drill: The technique of starting a fire with a bow and drill is simple, but you must exert much effort and be persistent to produce a fire. You need the following items to use this method:
    • Socket: The socket is an easily grasped stone or piece of hardwood or bone with a slight depression in one side. Use it to hold the drill in place and to apply downward pressure.
    • Drill: The drill should be a straight, seasoned hardwood stick about 2 centimeters in diameter and 25 centimeters long. The top end is round and the low end blunt (to produce more friction).
    • Fire board. Its size is up to you. A seasoned softwood board about 2.5 centimeters thick and 10 centimeters wide is preferable. Cut a depression about 2 centimeters from the edge on one side of the board. On the underside, make a V-shaped cut from the edge of the board to the depression.
    • Bow. The bow is a resilient, green stick about 2.5 centimeters in diameter and a string. The type of wood is not important. The bowstring can be any type of cordage. You tie the bowstring from one end of the bow to the other, without any slack.

To use the bow and drill, first prepare the fire lay. Then place a bundle of tinder under the Vshaped cut in the fire board. Place one foot on the fire board. Loop the bowstring over the drill and place the drill in the precut depression on the fire board. Place the socket, held in one hand, on the top of the drill to hold it in position. Press down on the drill and saw the bow back and forth to twirl the drill. Once you have established a smooth motion, apply more downward pressure and work the bow faster. This action will grind hot black powder into the tinder, causing a spark to catch. Blow on the tinder until it ignites.

Note: Primitive fire-building methods are exhaustive and require practice to ensure success.

HELPFUL HINTS

  • Use nonaromatic seasoned hardwood for fuel, if possible.
  • Collect kindling and tinder along the trail.
  • Add insect repellent to the tinder.
  • Keep the firewood dry.
  • Dry damp firewood near the fire.
  • Bank the fire to keep the coals alive overnight.
  • Carry lighted punk, when possible.
  • Be sure the fire is out before leaving camp.
  • Do not select wood lying on the ground. It may appear to be dry but generally doesn’t provide enough friction.

The post Firemaking – How to Make a Fire appeared first on Downtown Homestead.



from Downtown Homestead http://downtownhomestead.com/firemaking-make-fire/
Labels:

Comments

Post a Comment

Popular posts from this blog

Air Condition Your Garden

July, it is the time of the year when air conditioning is as important in the garden as it is in the home. You, as the temperature rises, can cool off with an electric fan, a cool drink or by hiding away in a cool spot. Your plants are not quite that lucky; yet certain gardening techniques can be employed to help your plants through the summer months. The benefits of air conditioning in your garden will show up in the form of increased production, greater resistance to disease and pests and, in general, a more attractive vista. An improper over-heated environment during the warmer months often leads to wilt, dropping of buds and yellowing of foliage. Aeration of the soil is concerned with its exposure to the air. If this is lacking then your plants very likely will suffer this summer. Believe it or not but there are millions of tiny spaces between the soil particles and this is where air resides. Soils that become water-logged force out this air, a condition that leads to souring of ...
Post a Comment
Read more

Plumbing Noises In Your Home: Your Pipes are talking to you

To diagnose plumbing noises, it is important to determine first whether the unwanted sounds occur on the system’s inlet side-in other words, when water is turned on-or on the drain side. Noises on the inlet side have varied causes: excessive water pressure, worn valve and faucet parts, improperly connected pumps or other appliances, incorrectly placed pipe fasteners, and plumbing runs containing too many tight bends or other restrictions. Noises on the drain side usually stem from poor location or, as with some inlet side noise, a layout containing tight bends.   Common Plumbing Noises Hissing Pipes Hissing noise that occurs when a faucet is opened slightly, generally signals excessive water pressure. Consult your local water company if you suspect this problem; it will be able to tell you the water pressure in your area and can install a pressure reducing valve on the incoming water supply pipe if necessary. Thudding Pipes Thudding noise, often accompanied by shuddering pipe...
Post a Comment
Read more

How to Save Your Own Set of Seeds

Saving seeds doesn’t have to be a frightening task and can even be absolutely easy, according to Fred Bove of the San Francisco Permaculture Guild . Instead of waiting for the last riffraff plants to flower, he instructs to look for the biggest, most colorful specimens that were among the first few plants to become ripe. He urges to resist harvesting the first beautiful flower, vegetable or herb of any one planting, and allow full maturity. “You want to save the best characteristics (of any plant) and pass them on,” explained Bove. Depending on the plant, you may want to select for size, flavor or how quickly it takes for the crop to reach maturity. “That way, you’re promoting the desired characteristics in the next generation of seeds.” The next important challenging task is identifying a seed that’s ready for saving. There are different ways to save seeds, depending on the variety. Plants in the apiaceae family, which includes parsley, fennel and cilantro, will bloom and form umbr...
Post a Comment
Read more